Bender starts smoking.

To make a cigar for Bender.... Ideally it shouldn't fade, and should look reasonably "realistic", or at least as real as Bender does.
I started with a short length of 20mm (3/4") electrical conduit, with a magnet taped into on end.
I also grabbed some empty chip packets (Samboy BBQ) for the orange colour, and the "sparkly texture"


To simulate the burning/ glowing end of the cigar, I cut the chip packets up to get 50mm (2") wide strips of orange material, folded them lengthwise so no silver showed, and rolled them into a tight roll to place inside the end of the conduit - shown below.


I then rolled a wider strip around the outside to cover the end of the conduit, and taped this in place. The rest of the chip packet was then folded into itself to form a 60mm (2 1/2") wide strip, and wrapped around the conduit to widen the middle portion of the cigar. I then wrapped the whole thing in tape to form the cigar shape, and leave the orange exposed.


Once the taping was finished, I painted it Brown, and let it dry. The photo below shows the painted cigar drying - stuck by it's magnet to a cabinet.


I then added the black spiral lines to the cigar using the gridding tape (see article on teeth) and gave the cigar to Bender - he seems to enjoy it.

Next article will cover the beard.